AutoCAD DWG Files | City of Tumwater, WA

AutoCAD DWG

DWG drawing files are available for use by architects, engineers and non-CAD designers, for use in drawings and plans that are to be submitted to the City of Tumwater.

Select the DWG (drawing) file below to download each image.

Note: You must have a drawing application that can read DWG file format to access these files.

Sewer

2022 Standard Sewer Details

SS-1-Access Rd	SS-2-TYPE 1 MH	SS-3-Shallow MH
SS-4-Saddle Manhole w- Cast-In-Place Base	SS-5-Manhole Ring Assemblies	SS-6-Drop Connection
SS-7-Drop Connection Outside PVC	SS-8-Inside Drop Connection - PVC	SS-9-GV Low Profile Inside Drop Connection
SS-10-Cleanout 8 Inch Sewer Main	SS-11-6 Inch Lateral Cleanout	SS-12-1500 Gallon S.T.E.P. Septic Tank
SS-13-3000 Gallon S.T.E.P. Septic Tank	SS-14-1500 Gallon S.T.E.P. Tank	SS-15-3000 Gallon S.T.E.P. Tank
SS-16-Air Release Valve	SS-17-Valve Box	SS-18-Sewer Valve Marker
SS-19-Step Control Panel Detail	SS-20-S.T.E.P. Connection Single Family Duplex	SS-21-Grinder Connection Single Family Duplex
SS-22-S.T.E.P. Service Connections	SS-23-Pressure Sustaining Device	SS-24-Community S.T.E.P. Station (Typical)
SS-25-Pressure Mains Future Extension	SS-26-Pipe Zones	SS-27-Community S.T.E.P. Electrical System
SS-28-Deflected Pressure Sewer Main Installation	SS-29-Gravity Sanitary Sewer Service	SS-30-Seal-Off Union Installation
SS-31-Low Point Drain	SS-32-Pressure Main Connection	SS-33-Lift Station Wash Hydrant
SS-34-Typical Interim Sewer Facilities Layout	SS-35-Intermittent Sand Filter Plan View	SS-36-Intermittent Sand Filter Profile View
SS-37-Residential Sized Grinder	SS-38-Commerical Grinder

Storm

2022 Storm Standard Details

SD-1 CATCH BASIN MESSAGE	SD-2 SILT TRAP TEE	SD-3 CURB INLET & CB
SD-4 CURB INLET & MH	SD-5 BAFFLE 24INCH(+)	SD-6 BAFFLE 24INCH(-)
SD-7 RAIN GARDEN SETBACK	SD-8 CURB INLET TYPE1	SD-9 NO POOCH POLLUTE
SD-10, TRASH RACK DETAIL	SD-11 TRENCH DAM DETAIL

Street

2022 Street Standard Details

ST-01-CURB_INLET_TEST	ST-1-PRIVATE ROAD DRIVEWAY DETAIL	ST-2-PAVEMENT_DESIGN
ST-3-PAVEMENT DESIGN WORKSHEET	ST-4-SIDEWALK DETAIL	ST-5-SIDEWALK SPACING
ST-7-CONCRETE CURB GUTTER	ST-8-ROLLED CURB GUTTER	ST-9-J-BOX
ST-10-TERMINAL CABINET INSTALLATION	ST-11-TRAY CABLE AT MAST ARM END	ST-12-TYPICAL STREET LIGHT INSTALLATION
ST-13-J-BOX LOCATIONS	ST-14-LUMINAIRE FOUNDATION	ST-15-SHALLOW FOUNDATION DETAIL
ST-16-MAIL BOX CLUSTER STYLE	ST-17-METER SERVICE DISCONNECT	ST-18-SIGNAL CABINET FOUNDATION
ST-19-SURFACE MONUMENT IN PAVEMENT	ST-20-PIPE ZONES	ST-23-TREE PLANTER AND BARRIER
ST-24-SIGN INSTALLATION	ST-25 SIGN NOTES	ST-30-BULB OUT PARKING ONE WAY
ST-31-BULB OUT PARKING TWO WAY	ST-32-20' BULB OUT PARKING ONE WAY	ST-33-20' BULB OUT PARKING TWO WAY
ST-34-25' BULB OUT PARKING ONE WAY	ST-35-25' BULB OUT PARKING TWO WAY	ST-50-STANDARD BULB OUT PARKING ONE WAY
ST-51 SIDEWALK BARRICADE

Water

2022 Water Standard Details

WA-1, Standard Blocking	WA-2, Thrust Loads	WA-3, Vertical Blocking Restrained Joints
WA-3, Vertical Blocking With Restrained Joints For NEW Lines	WA-4, Pipe Clamp Anchor Rods For Blocking	WA-5.2, Water Trench Detail - Unpaved Areas
WA-6, Encasement Spacer Installation	WA-7, Deflected Water Main Installation For Gravity Sewer Only	WA-7.1, Separation Special Requirements Detail
WA-8, Crossing A.C. Watermain Replacement	WA-9, Methods For Filling New Water Mains	WA-9-1, Methods For Filling New Water Mains
WA-10, Live Tapping Tee	WA-11, CUT to Tee	WA-12, Standard Valve Box
WA-12.1, Valve Box Cover And Stem Detail	WA-13, Fire Hydrant Assembly	WA-14, Hydrant Bollard
WA-15, Fire Hydrant Placement In Cut Or Fill Areas	WA-16, Water Marker Post	WA-17, Blow Off Hydrant Assembly
WA-18, BLANK	WA-19, 2 Inch Blow Off Assembly For Extendable Mains	WA-20, 2 Inch Air & Vacuum Release Valve
WA-21, 3-4 and 1 Inch Single Meter Service	WA-21.1, RPBA - Reduced Pressure Backflow Assembly	WA-21.2, DCVA Double Check Assembly
WA-22, 3-4 Inch Double Water Meter Service	WA-23, Typical Single Meter Placement	WA-24, Irrigation For Residential Domestic Service
WA-25, Irrigation Service (COMMERICAL)	WA-26, 1-1.5 to 2 Inch Single Meter Service w-RPBA	WA-27, 1-1.5 to 2 Inch Meter Setter
WA-28, Domestic and Fire Sprinkler Manifold	WA-29, Residential Fire Sprinkler Details	WA-30, 3 Inch Water Service Meter Manifold
WA-31, 4 Inch Water Service Meter Manifold	WA-32, Material List For 3 Inch And 4 Inch Manifold Water Meters	WA-33, Compound Water Meter With Bypass For 6 Inch And 8 Inch
WA-34, Material List For Compound Water Meter With Bypass For 6 Inch And 8 Inch Sizes	WA-35, Double Check Valve Assembly For 2 Inch Or Smaller Irrigation	WA-36, Reduced Pressure Backflow Assembly For 2 Inch or Smaller
WA-37, Double Check Valve Assembly For 3 Inch and Larger Irrigation	WA-37, Irrigation Double Check Valve Assembly 3 Inch and Larger	WA-38, Reduced Pressure Backflow Assembly 3 Inch and Larger
WA-39, Sampling Station	WA-40, Fire Sprinkler Underground Testing Limits	WA-41, Fire Sprinkler Underground Easement Limits
WA-42, Double Check Detector (DCDA) Valve Assembly With FDC	WA-43, Backflow Prevention For Vehicle Filling	WA-44, Pipe Zones In Descending Order
WA-45, Service Abandonment Detail	WA-46, Temporary Hydrant Meter With Check Valve Assembly	WA-47, Thrust Block Adjacent To Vault
WA-48 Typical Fire Supply Line Layout

AutoCAD DWGs in PDF Format

Contact Us

For assistance, call Tumwater Transportation and Engineering at (360) 754-4140.

AutoCAD DWG

AutoCAD DWGs in PDF Format

Contact Us

Navigation